NF T70-507-2007 国防用高能材料.安全性.易损性.沟槽中露天缓慢爆炸
作者:标准资料网 时间:2024-05-01 14:31:03 浏览:8730
来源:标准资料网
【英文标准名称】:Energeticmaterialsfordefense-Safety-Vulnerability-Deflagrationinopenairintrough.
【原文标准名称】:国防用高能材料.安全性.易损性.沟槽中露天缓慢爆炸
【标准号】:NFT70-507-2007
【标准状态】:现行
【国别】:法国
【发布日期】:2007-11-01
【实施或试行日期】:2007-11-17
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:G89
【国际标准分类号】:71_100_30
【页数】:9P;A4
【正文语种】:其他
Product Code:SAE J960
Title:Marine Control Cable Connection--Engine Clutch Lever
Issuing Committee:Marine Technical Steering Committee
Scope:The purpose of this SAE Recommended Practice is to provide guides toward standard conditions for operating marine hydraulic transmissions where push-pull cable control is applicable.For control cable information see SAE J917.a. Provide suitable detents at forward, neutral, and reverse positions. Approximately 22 N (5 lb) of cable force are required to move the engine clutch lever out of the detent positions.b. Provide an engine clutch lever with a 6.35 mm (1/4 in) diameter hole at a radius to provide 70 mm (2 3/4 in) linear travel from forward to reverse, with neutral at the center.c. The engine clutch lever (at 6.35 mm [1/4 in] diameter hole) to have 6.35 mm (1/4 in) maximum thickness.Common cable terminals used are ball joints, clevises, and pivots.d. Provide clear cable path to engine clutch lever.e. Provide choice of cable paths from different angles. This can be done by providing a sector type of lever with a series of holes equidistant from the centerline of the shaft. It can also be done by having the engine clutch lever repositionable on the engine clutch control shaft.f. Provide bracket support near the engine clutch control shaft. This can be a hub, bolt holes, bolt, or other means for use for attaching a cable anchor bracket. A bolt pattern concentric with the engine clutch control shaft is desirable.
基本信息
标准名称: | 乒乓球运动鞋 |
英文名称: | Special table tennis sports shoes |
中标分类: |
轻工、文化与生活用品 >>
服装、鞋、帽与其他缝制品 >>
鞋、靴 |
ICS分类: |
服装工业 >>
鞋袜
|
替代情况: | 原标准号GB 9893-88 |
发布日期: | 1900-01-01 |
实施日期: | 2001-03-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
出版日期: | 1900-01-01 |
页数: | 5页 |
适用范围
原标准号GB 9893-88
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 轻工 文化与生活用品 服装 鞋 帽与其他缝制品 鞋 靴 服装工业 鞋袜